Sign In
E-Catalog > 8. FUTAMURA MACHINES & TOOLS > series 100 with seal
PAGE VIEW : 7,617
Product Information :
Name :
series 100 with seal Category :
- เครื่องจักร, อุปกรณ์เกี่ยวกับเครื่องจักร, เครื่องมือกล
Sub - Category :
- 8. FUTAMURA MACHINES & TOOLS
Brand :
Futamura Model :
100 with sealProduct Type :
- สินค้า, ผลิตภัณฑ์
Short Description :
Rolling center Brand futamura Model 100 with seal 
Product Detail :
 |
||
|
||
 |
||
|
||
 |
||
|
Specification
| Code No. | Type No. | M.T | A | B | B1 | C | C1 | D | E | e | L |
Center Runout (Max.) |
| R102-301 |
102A with seal |
No2. | 37 | 23 | 10 | 69 | 4 | 36.5 | 27.7 | - | 133.2 | TIR0.005 |
| R103-301 |
103A with seal |
No.3 | 41 | 26 | 14 | 85.5 | 4.5 | 42 | 31 | - | 158.5 | |
| R104-301 |
104A with seal |
No.4 | 45 | 30 | 18 | 108.5 | 5.3 | 52 | 33 | - | 193.5 | |
| R103-302 |
103B with seal |
No.3 | 41 | 26 | - | 85.5 | 4.5 | 42 | 31 | - | 158.5 | |
| R104-302 |
104B with seal |
No.4 | 45 | 30 | - | 108.5 | 5.3 | 52 | 33 | - | 193.5 | |
| R105-302 |
105B with seal |
No.5 | 65 | 42 | - | 138 | 6.3 | 65.9 | 47.6 | - | 251.5 | |
| R103-317 |
103-17A with seal |
No.3 | 41 | 26 | 12 | 85.5 | 4.5 | 42 | 40 | 20 | 167.5 | |
| R104-317 |
104-17A with seal |
No.4 | 45 | 30 | 12 | 108.5 | 5.3 | 52 | 45.5 | 20 | 206 |
Features
- Designed for operating speed (No.2 for 3500, No.3 and No.4 for 3000, No.5 for 2500)
- The reduced body diameter within the center angle of 60 degree is suitable for cutting small parts.
- Incorporates duplex thurst, thurst and needle bearings.
- The V seal is used for protection against penetration of cutting oil.
Note: This model has a range of approx. 0.5mm longitudinal travel in no-load operations, but it offers a good performance without trouble.
: When using the sealed model 100, its drain (scupper) should be securely installed downward.
